Focus L4-2.0L DOHC VIN 5 (2003)
3. NOTE: Make sure the brake caliper retaining bolt springs are correctly located.
Install the caliper.
4. Tighten the brake hose union.
1
Tighten the union.
2
Remove the brake hose clamp.
5. Attach the parking brake cable to the brake caliper.
1
Position the cable and conduit.
2
Install the conduit retaining clip (if equipped).
3
Pull back the parking brake lever.
4
Connect the cable to the parking brake lever.
6. Install the wheel and tire.
7. Bleed the brake system.
