Focus L4-2.0L DOHC VIN 5 (2003)
Camshaft: Service and Repair
Camshafts
Special Tool(s}
Removal
1. Remove the timing belt.
2. NOTE: Hold the camshafts by the hexagon with an open ended wrench to stop them from rotating.
Remove the camshaft pulleys.
3. Remove the oil feed flange.
^
Discard the camshaft oil seals.
^
Discard the oil teed flange oil seal.
4. CAUTION: Loosen the camshaft bearing caps in the sequence shown.