Focus L4-2.0L DOHC VIN 5 (2003)
Installation
1. NOTE: The mating faces of the oil pan and the lower crankcase must be free from oil and sealant residue.
Clean the mating faces of the oil pan and the lower crankcase.
2. Clean all traces of oil residue and oil sludge from the oil pan.
3. CAUTION: The lower crankcase may be damaged if sealant enters the blind holes.
Install ten M6 x 20 mm studs into the blind holes shown (engine shown removed for clarity).
4. NOTE: Attach the oil pan within ten minutes of applying the sealant. Apply a 3 mm diameter bead of sealant to the mating face of the oil pan.
5. NOTE: The oil pan must not be removed once it comes into contact with the lower crankcase housing.
-
Attach the oil pan to the lower crankcase housing. Remove the studs.
6. Install the oil pan retaining bolts.