Focus L4-2.0L DOHC VIN 5 (2003)
14. CAUTION: Use a blunt object (a plastic cable tie) to apply the silicone grease, to avoid damaging the spark plug connectors.
CAUTION: Push on the spark plug connectors, keeping them in line with the spark plugs.
NOTE: Coat the inside of the spark plug connectors with silicone grease to a depth of 5 - 10 mm.
Install the valve cover.
1
Tighten the bolts in two stages.
-
Stage 1: 2 Nm.
-
Stage 2: 7 Nm.
2
Attach the PCV hose to the valve cover.
-
Connect the VCT actuator electrical connector.
3
Coat the spark plug thread with anti-seize grease, screw in the spark plugs and push in the spark plug connector until it engages.
15. Install the spark plug cover.
16. NOTE: Position the upper timing belt cover and the center timing belt.
Install the engine front mount bracket.