Focus L4-2.0L DOHC VIN 5 (2003)
5. Disconnect the IMRC actuator cable from the IMRC lever (intake manifold assembly shown removed for clarity).
1. Rotate the IMRC lever counterclockwise.
2. Disconnect the IMRC actuator cable.
6. Remove the IMRC actuator cable from the intake manifold assembly (intake manifold assembly shown removed for clarity).
^
Release the IMRC actuator cable locking tangs.
7. Remove the left-hand fender splash shield retaining screws and position to one side.
8. Disconnect the IMRC actuator electrical connector.
9. Remove the IMRC actuator.
INSTALLATION
NOTE:
^
Make sure the pins in the IMRC are properly aligned.