Focus L4-2.0L DOHC VIN 5 (2003)
Seat Belt Tensioner: Vehicle Damage Warnings
CAUTION:
^
The bolt securing the safety belt anchor is held captive by a paper washer. The bolt, spacer and paper washer must remain on the safety belt anchor
at all times when the safety belt is detached or removed.
^
Make sure the spacer is correctly located between the floor covering and inner sill.
^
Make sure that the rear end of the anchor rail, on 3-door vehicles, is correctly located before tightening the bolt
^
Make sure the pin on the B-pillar trim is located correctly into the height adjuster.
^
Note the position and routing of the wiring harness to aid assembly. An incorrectly routed harness may lead to the wires becoming damaged on the
seat mechanism.