Focus L4-2.0L DOHC VIN 5 (2003)
Ignition Switch Lock Cylinder: Service and Repair
Ignition Lock Cylinder - Removal and Replacement
IGNITION LOCK CYLINDER
REMOVAL
1. Disconnect the battery ground cable.
2. Remove the instrument panel lower panel.
1
Remove the screws.
2
Release the fastener.
3. Detach the steering column upper shroud.
-
Using a thin bladed screwdriver, release the two clips (one each side).
4. Remove the audio control switch (if equipped).
1
Using a thin bladed screwdriver, release the locking tang.
2
Disconnect the electrical connector.