Focus L4-2.0L DOHC VIN 5 (2003)
5. Remove the radiator splash shield.
^
Remove the six screws.
^
Disconnect the air temperature sensor electrical connector (if equipped).
6. Using the special tool, disconnect the fluid cooler hose.
1
Insert the special tool into the hose quick-release coupling.
2
Move the special tool along the pipe to release the locking tangs.
^
Allow the fluid to drain into a suitable container.
7. Remove the fluid cooler.
Installation
1. NOTE: After installation bleed the power steering system.
To install, reverse the removal procedure.
