Focus L4-2.0L DOHC VIN 5 (2003)
10. Disconnect the power steering line from the power steering pump.
^
Allow the fluid to drain into a suitable container.
All Vehicles
11. Remove the power steering pump to steering gear pressure line.
Installation
All Vehicles
1. Using the special tool, install a new O-ring seal onto the steering gear to power steering pump union.
1
Push the new O-ring seal onto the special tool.
2
Locate the special tool onto the union and install the O-ring seal.
2. CAUTION: Make sure the line is routed correctly.
Install the power steering pump to steering gear pressure line into position.
Vehicles with 2.0L Zetec engine
3. Attach the power steering line support brackets.
^
Install the bolts.
^
Attach the speed control cable (if equipped).