Focus L4-2.0L DOHC VIN 5 (2003)
6. Using the special tools, remove the bearing outer ring from the wheel knuckle.
Installation
CAUTION: Avoid any impact on the wheel speed sensor ring.
CAUTION: Make sure the wheel speed sensor ring is clean.
CAUTION: Avoid any contact between the wheel speed sensor ring and a magnetic surface.
1. CAUTION: Make sure the wheel bearing is installed into the wheel knuckle with the wheel speed sensor ring, colored black, at the wheel speed
sensor end of the wheel knuckle.
Using the special tools, install the new wheel bearing to the wheel knuckle.
2. NOTE: Make sure the circlip does not cover the wheel speed sensor.
Install the circlip to the wheel knuckle.