Focus L4-2.0L DOHC VIN 5 (2003)
10. CAUTION: To prevent damage to the transaxle, do not run the engine above idle.
NOTE: If the fluid return rate is less than 0.95 liters in 30 seconds, or if the return hose pulsates, check for restrictions at the pump, cooler or
cooler lines.
Run the engine at idle and pump out 3 liters (3.17 quarts) of automatic transmission fluid.
11. Switch OFF the engine.
12. Add 3 liters (3.17 quarts) of automatic transmission fluid to the transaxle.
13. CAUTION: To prevent damage to the transaxle, do not run the engine above idle.
Run the engine at idle and pump out 3 liters (3.17 quarts) of automatic transmission fluid.
14. Switch OFF the engine.
15. Raise and support the vehicle.
16. Detach the length of suitable drain hose from the transmission fluid return hose.
17. NOTE: Remove the plug from the transmission fluid cooler return port.
Connect the return hose to the transmission fluid cooler.
18. Lower the vehicle.
19. Add 3 liters (3.17 quarts) of automatic transmission fluid to the transaxle.
20. Install the fluid level indicator to the fluid level indicator tube.
21. CAUTION: To prevent damage to the transaxle, do not run the engine above idle.
Run the engine.