Focus L4-2.0L DOHC VIN 5 (2003)
1. NOTE: Use thread locking compound for the nuts.
Install the selector lever assembly.
^
Install the four nuts.
2. Connect the selector lever assembly electrical connector.
3. NOTE: The selector lever has its own detent mechanism. Holding the selector lever is not necessary.
Install the selector cable to the selector lever.
1
Shift the selector lever to "P".
2
Clip in the selector lever cable outer sleeve.
3
Clip in the selector lever cable.
4. Install the floor console.
5. Re-adjust the system.
Selector Lever Bezel
Selector Lever Bezel
Removal
1. Remove the selector lever knob.