ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

ABOUT US
Mechanical Specifications|Page 4735 > < M/T - Clunking/Rattling Noise/Premature Clutch Wear|Page 4732

Focus L4-2.0L DOHC VIN 5 (2003)

Page 1
background image

Pressure Plate: Mechanical Specifications

IB5 Transaxle

Clutch pressure plate to flywheel ..........................................................................................................................................................  29 Nm (21 ft. lbs.)

MTX75 Transaxle

Clutch pressure plate to flywheel ..........................................................................................................................................................  29 Nm (21 ft. lbs.)

MT285 Transaxle

Clutch pressure plate to flywheel ..........................................................................................................................................................  29 Nm (21 ft. lbs.)

IB5

CAUTION:  Tighten the clutch pressure plate retaining bolts finger tight and then evenly by two turns at a time to the specified torque.

NOTE:  Install new clutch pressure plate retaining bolts.

MTX75

Mechanical Specifications|Page 4735 > < M/T - Clunking/Rattling Noise/Premature Clutch Wear|Page 4732