Focus L4-2.0L DOHC VIN 5 (2003)
Windshield: Vehicle Damage Warnings
CAUTION:
-
Make sure the cutting blades are changed where the cutting depth changes to avoid damage to the body and trim panels.
-
When installing urethane installed glass parts, the vehicle must not be driven until the urethane has cured. At temperatures above 21°C
(70°F) and relative humidities above 50%, adequate cure time is typically 24 hours. (Refer to the Essex drive away chart for the cure
times as the temperatures and humidity vary). Inadequate or incorrect curing can adversely affect the retention of the windshield.
-
Wipe off the urethane glass prep immediately after each application because it flash dries.
-
If vehicle is to driven within 24 hours of urethane application, urethane adhesive Essex U-216 must be used due to its one-hour cure time.
