Focus L4-2.0L SOHC VIN P (2000)
Parking Brake Cable: Adjustments
Adjustment
1. Remove the parking brake control boot.
1
Detach the boot clip.
2
Remove the boot.
2. NOTE: Make sure the rear brakes are at a cool temperature. Release the parking brake control to its lowest position.
3. Loosen the parking brake cable adjustment nut until there is no tension in the cable.
1
Remove the clip.
2
Loosen the adjustment nut.
4. Apply and release the brake pedal to make sure the rear brakes are correctly adjusted.
5. Raise and support the vehicle.
6. Make sure the parking brake cable is correctly routed and located in its clips.
7. Raise the parking brake control up four notches.
