Focus L4-2.0L SOHC VIN P (2000)
Repairs and Inspections Required After a Collision: Service and Repair
Safety Belt Procedure After A Collision
SEAT BELT SYSTEM
WARNING: All safety belt assemblies including retractors, buckles, front safety belt buckle support assemblies (slider bar), if equipped,
child safety seat tether brackets and attaching hardware should be inspected after any collision. New safety belt assemblies should be fitted
unless a qualified technician finds the assemblies show no damage and operate correctly. New safety belt assemblies should also be fitted
where safety belt assemblies not in use during a collision, are inspected and damage or incorrect operation is noted. Failure to follow these
instructions may result in personal injury.
