ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Antenna Cable|Service and Repair|Page 7789 > < Antenna Cable|Service and Repair
Page 2
background image

4. NOTE:  LH shown, RH similar.

Remove the sun visor catch clips.
1

Open the tabs.

2

Remove the 2 screws.

5. Remove the overhead console.

6. Open the covers on the passenger assist handles.

7. Using a suitable 6-mm flat-bladed screwdriver, remove the passenger assist handles.

-

Rotate the screwdriver 90 degrees counterclockwise to release the retaining clips.

8. Carefully lower the front edge of the headliner to allow access to the antenna cable.
9. Remove the antenna cable/base screw.

Antenna Cable|Service and Repair|Page 7789 > < Antenna Cable|Service and Repair