Focus L4-2.0L VIN N (2006)
4. Disconnect the compressor manifold and tube assembly at the suction accumulator.
-
Discard the O-ring seal.
-
To install, tighten to 8 Nm (71 lb-in).
5. Remove the suction accumulator bracket nut.
-
To install, tighten to 7 Nm (62 lb-in).
6. Remove the 2 suction accumulator bracket bolts.
-
To install, tighten to 7 Nm (62 lb-in).
7. Disconnect the evaporator outlet line fitting at the suction accumulator.
-
Discard the O-ring seals.
8. Remove the suction accumulator.
9. To install, reverse the removal procedure.
