Focus L4-2.0L VIN N (2006)
^
To install, tighten to 20 Nm (15 ft. lbs.).
4. Remove the steering column upper shroud. Using a suitable tool, release the 2 clips (one on each side).
5. If equipped, remove the audio control switch.
^
Using a suitable tool, release the locking tab.
^
Disconnect the electrical connector.
6. Remove the steering column lower shroud.
1
Release the steering column locking lever.
2
Remove the screws.
7. Disconnect the ignition switch and the LH multi-function switch electrical connectors.
8. Remove the ignition switch.
^
Release the clips.
9. To install, reverse the removal procedure.