Focus L4-2.3L VIN Z (2003)
1. Install the cable and guide.
1
Engage the guide in the guide rail.
2
Slide the guide to the rear of the guide rail.
2. Align both cable guides with the guide stud securing screw hole.
3. Install the cable in the roof opening panel frame.
4. CAUTION: Do not move the winder mechanism.
NOTE:
-
Check that the two guide studs are in position on the underside of the cover panel.
-
The 10 front screws are plastic and the six side screws are metal.
Locate the cover panel onto the roof opening panel frame.