Focus L4-2.3L VIN Z (2003)
Seat Cushion: Service and Repair
Removal And Installation
Front Seat Cushion - Svt
FRONT SEAT CUSHION - SVT
REMOVAL
WARNING: Note the position of the wiring harnesses, to aid installation. An incorrectly routed wiring harness could become damaged when
the seat is moved. Failure to follow this instruction may result in personal injury.
1. Remove the front seat.
2. Detach the safety belt buckle pretensioner electrical connector from the underside of the seat.
1
Using a suitable screwdriver, depress the locking tang.
2
Disconnect the electrical connector.
3
Detach the retaining clips.
3. Detach the cushion heater mat electrical connector from the underside of the seat.
1
Using a suitable screwdriver, depress the locking tang.
2
Disconnect the electrical connector.
3
Detach the retaining clips.
4. Detach the seat height adjust motor electrical connector from the underside of the seat.
1
Using a suitable screwdriver, depress the locking tang.
2
Disconnect the electrical connector.