Focus L4-2.3L VIN Z (2003)
6. Tighten the brake pedal retractor arm retaining bolt.
^
Install the air duct, if necessary.
7. With the engine running depress the brake pedal three times to make sure the brake pedal moves freely and returns to the full brake off position.
8. CAUTION: Install a new brake booster actuating rod pin.
Install the brake booster actuating rod pin.
1
Depress the brake pedal.
2
Install the brake booster actuating rod pin.
9. Pull out the speed control deactivation switch (if equipped) and stop lamp switch plungers until they are fully extended.
^
Measure the plunger length.
^
Speed control deactivation switch (colored green) XX mm = 24 mm.
^
Stop lamp switch (colored grey) XX mm = 21 mm.
10. CAUTION: When installing the switches, the stop lamp switch is rotated counterclockwise and the remaining switches are rotated clockwise.
