Focus L4-2.3L VIN Z (2003)
Vehicles with rear disc brakes
20. Detach the parking brake cable from the tie bar on both sides.
21. Detach the parking brake cable from the caliper on both sides.
1
Pull back the parking brake lever.
2
Disconnect the cable from the parking brake lever.
3
Remove the conduit retaining clip.
4
Disconnect the cable and conduit.
All vehicles
22. Remove the parking brake cables.
Installation
1. NOTE: The left-hand cable can be identified by a white sleeve and the right-hand cable by a black sleeve. Check the exhaust hanger insulators for
damage and fatigue. Install new exhaust hanger insulators as required, using a suitable lubricant. Install new exhaust tailpipe and muffler assembly
nuts.
To install, reverse the removal procedure.
2. Adjust the parking brake.