Focus L4-2.3L VIN Z (2003)
6. Install the accessory drive belt splash shield and the 2 bolts.
-
Tighten to 9 Nm (80 lb-in).
7. Alternate tightening the 1 front belihousing-to-engine and 1 rear engine-tobelihousing lower bolts to slide the transmission and engine together.
-
Tighten to 48 Nm (35 lb-ft).
8. NOTE: Automatic transmission shown~ manual transmission similar.
-
Tighten the remaining 1 (automatic transmission) or 2 (manual transmission) lower front bellhousing-to-engine bolt(s).
-
Tighten to 48 Nm (35 lb-ft).
