Focus L4-2.3L VIN Z (2003)
Muffler: Service and Repair
Front Muffler
Removal
1. NOTE: The exhaust system is a one-piece construction for production, and two or three piece construction for service exhaust systems.
It is necessary to cut the production exhaust system to enable the service section to be fitted. Before cutting any part of the exhaust system, check
the position of the cut is correct in comparison to the service sections to be installed.
2. Raise and support the vehicle.
3. CAUTION: Do not excessively bend or twist the exhaust flexible pipe. Failure to follow these instructions may cause damage to the exhaust
flexible pipe.
Support the exhaust flexible pipe with a support wrap or suitable splint.
4. Detach the exhaust flexible pipe from the tailpipe and muffler assembly.
^
Discard the nuts and gasket.
5. Detach the tailpipe and muffler assembly from the front exhaust hanger insulators.
6. Cut the exhaust system.
