Focus L4-2.3L VIN Z (2003)
Idle Speed/Throttle Actuator - Electronic: Service and Repair
REMOVAL
1. Disconnect the battery ground cable.
2. Remove throttle body snow shield.
^
Remove the retaining screw.
^
Release the emission tube.
^
Remove the snow shield.
3. Remove the Idle Air Control (IAC) valve.
1
Disconnect the IAC electrical connector.
2
Remove the two IAC retaining screws.
3
Remove the IAC valve.
INSTALLATION
1. To install, reverse the removal procedure.
NOTE: Install a new IAC valve gasket.
