Focus L4-2.3L VIN Z (2003)
10. Disconnect the fuel injector electrical connectors.
11. Remove the fuel injection supply manifold (engine shown removed for clarity).
12. Remove the fuel injectors from the fuel injection supply manifold.
^
Slide the clip to release the injector.
13. Remove and discard the fuel injector O-ring seals.
INSTALLATION
WARNING:
^
DO NOT SMOKE OR CARRY LIGHTED TOBACCO OR OPEN FLAME OF ANY TYPE WHEN WORKING ON OR NEAR ANY
FUEL RELATED COMPONENTS. HIGHLY FLAMMABLE VAPORS ARE ALWAYS PRESENT AND MAY IGNITE. FAILURE TO
FOLLOW THIS INSTRUCTION MAY RESULT IN PERSONAL INJURY.
^
THIS PROCEDURE INVOLVES FUEL HANDLING. BE PREPARED FOR FUEL SPILLAGE AT ALL TIMES AND ALWAYS
OBSERVE FUEL HANDLING PRECAUTIONS. FAILURE TO FOLLOW THESE INSTRUCTIONS MAY RESULT IN PERSONAL
