Focus L4-2.3L VIN Z (2003)
Seat Belt Height Adjuster: Service and Repair
REMOVAL
4-door, 5-door and Wagon
1. Detach the safety belt lower anchor.
3-door
2. Detach the safety belt lower anchor.
1. Remove the Torx bolt from the anchor rail.
2. Slide the safety belt off the anchor rail.
All Vehicles
3. Detach the B-pillar upper trim panel.
1. Detach the retaining clips.
2. Remove the lower anchor bolt and spacer from the safety belt webbing (4-door and Wagon shown).
3. Feed the safety belt webbing through the B-pillar upper trim panel.
NOTE: Certain production trim panels have a retaining clip on the front edge.