Focus L4-2.3L VIN Z (2003)
Steering Wheel: Service and Repair
Steering Wheel
Removal
1. Remove the driver air bag module.
2. Center the steering wheel.
^
Remove the ignition key and lock the steering in position.
3. Remove the steering wheel
1
Disconnect the speed control electrical connector (if equipped).
2
Remove the bolt
Installation
WARNING: When installing the steering wheel make sure the air bag sliding contact is centralized. Failure to follow this instruction may
result in personal injury.
CAUTION: After installation, check the correct location of the steering wheel on the steering column shaft by turning the steering wheel in a
counterclockwise direction.
1. To Install, reverse the removal procedure
