Focus L4-2.3L VIN Z (2003)
6. NOTE: The following step is only required for vehicles without a water seal installed.
Attach the water seal and protective cap to the wheel spindle.
7. NOTE: The following step is only required for vehicles without a water seal installed.
Install the water seal in two stages.
^
Stage 1: Using the special tool, engage the water seal and protective cap.
^
Stage 2: Tighten to 7 Nm.
8. Remove the special tool.
^
Remove the protective cap.
9. Install the wheel hub.
Wheel Bearing - SVT
Wheel Bearing-SVT
