Focus L4-2.3L VIN Z (2003)
6. Remove the exhaust heat shield.
^
Unclip the selector lever cable.
7. Disconnect the selector lever cable from the selector lever assembly.
1
Open the adjuster assembly by turning the selector lever cable outer sleeve.
2
Disconnect the selector lever cable from the Transmission Range (TR) sensor bracket.
3
Remove the selector lever cable from the bracket.
8. Lower the vehicle.
9. Remove the floor console.
10. Remove the selector lever cable from the selector lever.
1
Shift the selector lever to "P".
2
Unclip the selector lever cable.
3
Unclip the selector lever cable outer sleeve.
11. Remove the footwell heater channel.