Focus L4-2.3L VIN Z (2003)
Shifter A/T: Service and Repair
Overhaul (Disassembly and Assembly)
Selector Lever
Disassembly
1. NOTE: Use vise jaw protectors for all work to be done in the vise.
Disconnect the Overdrive (O/D) switch electrical connector.
2. Remove the selector lever knob.
^
Remove the screw.
3. Disassemble the selector lever.
^
Pull off the tappet.
^
Unclip the bezel.
Assembly
To assemble, reverse the disassembly procedure.
^
Coat all sliding and turning parts with grease.
