Focus L4-2.3L VIN Z (2003)
11. Install the front heat shield.
12. Connect the center exhaust hanger and remove the support wire.
13. Connect the exhaust flange and install it to the rubber insulators.
14. Lower the vehicle.
15. Adjust the gearshift and selector cables.
16. Install the shifter boot and knob.
1
Unclip the cover or boot.
2
Twist off the gearshift lever knob. Remove the damping sleeves and compression spring.
17. Carry out road test to enable the Powertrain Control Module (PCM) to collect data.
