Focus L4-2.3L VIN Z (2003)
8. Remove the liftgate side trim panels on both sides.
All vehicles
9. Disconnect the heated rear window glass electrical connectors.
3-Door, 5-Door
10. CAUTION: Make sure the cutting blades are changed where the cutting depth changes to avoid damage to the body and trim panels.
NOTE:
-
Some resistance may be encountered when cutting through the glass locating pegs in the lower corners of the glass.
-
Lubricate the urethane adhesive with water to aid the special tool when cutting the urethane adhesive.
Using the special tool, place the flat side of the knife against the rear glass. Start at the top center and work out and down the pillars to the lower
corners cutting to the given maximum depths.
1
20 mm.
2
50 mm.
Wagon
