Focus L4-2.3L VIN Z (2003)
5. Remove the windshield washer pump with rubber gasket (shown with reservoir installed).
1
Disconnect the electrical connector.
2
Disconnect the hoses.
3
Lift out the pump.
INSTALLATION
1. NOTE: Follow this procedure if there is a concern of washer system water coming from the filled windshield washer reservoir when the vehicle
accelerates or decelerates strongly.
Press an additional cap onto the rear vent tube of the reservoir.
1
Front ventilation tube
2
Rear ventilation tube
3
Additional cap
2. NOTE: When installing the reservoir, the filler neck must be inserted using petroleum jelly.
To install, reverse the removal procedure.