| Removal and Installation | | -
Remove the wheel cylinder.
For additional information, refer to: Wheel Cylinder (206-02 Drum Brake, Removal and Installation).
| | | -
Detach the parking brake cable from the brake backing plate (wheel hub shown removed for clarity). - Depress the retaining clip.
- Detach the cable.
| | | -
Disconnect the wheel speed sensor electrical connector. | 4. Remove the components in the order indicated in the following illustration(s) and table(s). 1 - Wheel hub retaining bolts 5. To install, reverse the removal procedure. Installation Details Item 3 : Brake backing plate CAUTION:Make sure that the mating faces are clean and free from rust and foreign material. |
