| Removal and Installation | | -
Remove the brake pads.
For additional information, refer to: Brake Pads (206-04 Rear Disc Brake, Removal and Installation).
| 2. Remove the components in the order indicated in the following illustration(s) and table(s). 1 - Brake caliper anchor plate retaining bolts 2 - Brake caliper and anchor plate 3. To install, reverse the removal procedure. NOTE:Make sure the wheel hub face is clean and free of rust and foreign material. Removal Details Item 3 : Brake disc NOTE:Remove and discard the retaining clip (if equipped). Installation Details Item 3 : Brake disc | | -
If a new brake disc has been installed, install new brake pads.
For additional information, refer to: Brake Pads (206-04 Rear Disc Brake, Removal and Installation).
| |
