Removal and Installation All vehicles | -
Remove the engine upper cover. | Left-hand drive vehicles | -
Detach the brake fluid reservoir from the bulkhead extension panel and position it to one side. | All vehicles | -
Detach the fuel filter line from the exhaust gas recirculation (EGR) valve tube support bracket. | | -
Detach the EGR valve tube from the brake vacuum pump. | 5. Remove the components in the order indicated in the following illustration(s) and table(s). 2 - Brake vacuum pump retaining bolts 6. To install, reverse the removal procedure. Removal Details Item 3 : Brake vacuum pump retaining nut NOTE:Remove the brake vacuum pump retaining nut stud, to aid removal of the brake vacuum pump. Item 4 : Brake vacuum pump | -
Remove and discard the brake vacuum pump seals. | Installation Details Item 4 : Brake vacuum pump | -
CAUTION:Make sure the drive coupling is aligned with the camshaft coupling. Install new brake vacuum pump seals. | |