| Disassembly and Assembly 1. Disassemble the components in the order indicated in the following illustration(s) and table(s). 1 - Steering wheel retaining bolt 3 - Multifunction switch / clockspring carrier 5 - Passive anti-theft system (PATS) transceiver 2. To assemble, reverse the disassembly procedure. Disassembly Details Item 2 : Steering wheel | | -
CAUTION:Make sure the clockspring is not allowed to rotate. Secure in the central position with a piece of suitable tape. Secure the clockspring rotor to the clockspring outer. | | | -
Disconnect the electrical connectors. - Carefully feed the driver air bag module wiring harness through the steering wheel.
| Item 6 : Ignition lock cylinder | | -
Using a punch, remove the right-hand screw. | | | -
Using a pair of grippers, remove the left-hand screw. | | | -
Detach the the ignition switch body from the steering column. | | | -
Turn the ignition key to position I. | | | -
Using a suitable tool, release the locking tang. | Assembly Details Item 2 : Steering wheel | | -
Connect the electrical connectors. - Carefully feed the driver air bag module wiring harness through the steering wheel.
| | | -
Remove the tape securing the clockspring. | |
