ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

303-01A Engine - 1.4L Duratec-16V (Sigma)-1.6L Duratec-16V (Sigma)|Description and Operation > < Bearing Inspection
Engine - 1.4L Duratec-16V (Sigma)/1.6L Duratec-16V (Sigma) - Specifications Focus 2004.75 (07/2004-)

Engine data - 1.4L engine

Description
Engine code ASDA, ASDB
Firing order 1-3-4-2
Bore 76.0 mm
Stroke 76.5 mm
Engine Capacity 1388 cm3
Compression ratio 11:1
Power output at 5700 rpm 59 kw (80 PS)
Torque at 3500 rpm 124 Nm
Maximum permissible engine speed continuous 6450 rpm
Max. engine speed (intermittent) 6675 rpm
Idle speed 750 rpm
Maximum oil consumption 0.5 L / 1000 km

Engine data - 1.6L engine

Description
Engine code HWDA, HWDB, SHDA1, SHDB1
Firing order 1-3-4-2
Bore 79.0 mm
Stroke 81.4 mm
Engine Capacity 1596 cm3
Compression ratio 11:1
Power output 6000 rpm 74 kw (100 PS)
Torque at 4000 rpm 150 Nm
Maximum permissible engine speed continuous 6450 rpm
Max. engine speed (intermittent) 6675 rpm
Idle speed 750 rpm
Maximum oil consumption 0.5 L / 1000 km

1Engine block in open deck design

Oil Pressure

Description bar
Minimum oil pressure at an oil temperature of 80°C and an engine speed of 800 rpm 1.0
Minimum oil pressure at an oil temperature of 80°C and an engine speed of 2000 rpm 2.5
Pressure relief valve opening pressure 4

Engine oil fill quantity for a 1.4L engine

Description Liters
Initial fill including oil filter 4.1
Service fill including oil filter 3.8
Service fill without oil filter 3.5

Engine oil fill quantity for a 1.6L engine

Description Liters
Initial fill including oil filter 4.5
Service fill including oil filter 4.1
Service fill without oil filter 3.75

Valve clearances.

Description mm
Valve clearance (engine cold) - intake valves 0.17 - 0.23
Valve clearance (engine cold) - exhaust valves 0.31 - 0.37

Cylinder head

Description mm
Maximum distortion (mating face) 0.03

Crankshaft dimensions

Description mm
Crankshaft endplay 0,55 ± 0,25

303-01A Engine - 1.4L Duratec-16V (Sigma)-1.6L Duratec-16V (Sigma)|Description and Operation > < Bearing Inspection