Ford Workshop Service and Repair Manuals
HOME
FEATURES
MENU
INDEX
ABOUT US
General Procedures|Removal and Installation >
< 303-01D Engine - 2.5L Duratec-ST (VI5)|Engine
Focus 2004.75 (07.2004-)
Mechanical Repairs
3 Powertrain / 303 Engine
303-01D Engine - 2.5L Duratec-ST (VI5)
Description and Operation
General Procedures
Valve Clearance Adjustment
Engine - 2.5L Duratec-ST (VI5) - Valve Clearance Adjustment
Focus 2004.75 (07/2004-)
General Procedures
Special Tool(s)
303-1183
Holder, Camshaft
Remove the camshafts.
Refer to: Camshafts (303-01D Engine - 2.5L Duratec-ST (VI5), Removal and Installation).
CAUTION:
Make sure that the valve tappets are installed in their original locations.
Install only one pair of tappets and the camshaft for the first measurement.
Special Tool(s):
303-1183
Torque:
17 Nm
Measure the valve clearance and if neccessary, adjust by installing new tappets.
Special Tool(s):
303-1183
Torque:
12 Nm
Repeat the measuring procedures for all cylinders on the intake and on the exhaust side.
Mechanical Repairs
3 Powertrain / 303 Engine
303-01D Engine - 2.5L Duratec-ST (VI5)
Description and Operation
General Procedures
Valve Clearance Adjustment
General Procedures|Removal and Installation >
< 303-01D Engine - 2.5L Duratec-ST (VI5)|Engine