Removal and Installation Removal NOTE:Removal steps in this procedure may contain installation details. | -
Drain the cooling system. Refer to: Cooling System Draining, Filling and Bleeding (303-03D Engine Cooling - 2.5L Duratec-RS (VI5)/2.5L Duratec-ST (VI5), General Procedures). | | -
Remove the air cleaner. Refer to: Air Cleaner - Vehicles With: PCM Security Shield (303-12B Intake Air Distribution and Filtering - 2.5L Duratec-ST (VI5), Removal and Installation). Refer to: Air Cleaner - Vehicles Without: PCM Security Shield (303-12B Intake Air Distribution and Filtering - 2.5L Duratec-ST (VI5), Removal and Installation). | Installation | -
To install, reverse the removal procedure. | | |