Removal and Installation | -
Location of the engine upper cover retaining clips. | | -
CAUTION:Care must be taken when releasing the fourth retaining clip and maneuvering the engine upper cover past the manifold absolute pressure (MAP) sensor. Failure to follow this instruction may result in damage to the MAP sensor. NOTE:Remove the engine upper cover in the sequence shown. Remove the engine upper cover. | | -
Drain the cooling system. For additional information, For additional information, refer to: Cooling System Draining, Filling and Bleeding - 2.0L (303-03G Engine Cooling - 2.0L Duratorq-TDCi (DW) Diesel, General Procedures). | 5. Remove the components in the order indicated in the following illustration(s) and table(s). 1 - Thermostat cover retaining bolts 6. To install, reverse the removal procedure. |