Removal and Installation Dowel with a diameter of 4mm | -
Remove the accessory drive belt. For additional information, refer to: Accessory Drive Belt - 2.0L Duratorq-TDCi (DW) Diesel (303-05 Accessory Drive, Removal and Installation). | | -
Install the engine mount to the engine. | | -
Raise and support the vehicle. For additional information, refer to: Lifting (100-02, Description and Operation). | 4. Remove the components in the order indicated in the following illustration(s) and table(s). 5. To install, reverse the removal procedure. Removal Details Item 1 : Accessory drive belt tensioner Installation Details Item 1 : Accessory drive belt tensioner CAUTION:Make sure the accessory drive belt tensioner locating pin is aligned with the corresponding hole in the accessory drive belt tensioner mounting bracket. | -
Reset the accessory drive belt tensioner to the detention position. - Rotate the accessory drive belt tensioner counterclockwise.
- Install a suitable dowel with a diameter of 4mm into the hole of the accessory drive belt tensioner bracket.
| |