ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

ABOUT US
303-08C Engine Emission Control - 1.6L Duratorq-TDCi (DV) Diesel > < Crankcase Vent Oil Separator

Focus 2004.75 (07.2004-)

Engine Emission Control - 1.8L Duratec-HE (MI4)/2.0L Duratec-HE (MI4) - Exhaust Gas Recirculation (EGR) Valve Focus 2004.75 (07/2004-)
Removal and Installation

Special Tool(s)

Remover/Installer, Coolant Hose Clamp

303-397
  1. Drain the cooling system. For additional information, refer to Section  303-03A Engine Cooling / 303-03B Engine Cooling / 303-03C Engine Cooling / 303-03D Engine Cooling / 303-03E Engine Cooling / 303-03F Engine Cooling / 303-03G Engine Cooling.
  1. Disconnect the battery ground cable. For additional information, refer to Section  414-01 Battery, Mounting and Cables.

  1. Remove the upper engine cover.

  1. Remove the air cleaner outlet pipe.

5. Remove the components in the order indicated in the following illustration(s) and table(s).

 
Item
Part Number
Description
1
-
EGR valve electrical connector
2
-
Throttle body to EGR valve coolant hose
See Removal Detail
3
-
EGR valve

6. To install, reverse the removal procedure.

  1. Initialize the door window motors. For additional information, refer to Section  501-11 Glass, Frames and Mechanisms.

Removal Details

Item 2 : Throttle body to EGR valve coolant hose
  1. Using the special tool, remove the throttle body to EGR valve coolant hose from the throttle body.

  1. Using the special tool, remove the throttle body to EGR valve coolant hose from the EGR valve.

303-08C Engine Emission Control - 1.6L Duratorq-TDCi (DV) Diesel > < Crankcase Vent Oil Separator