ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

ABOUT US
310 Fuel System > < Catalytic Converter

Focus 2004.75 (07.2004-)

Exhaust System - 2.5L Duratec-RS (VI5)/2.5L Duratec-ST (VI5) - Exhaust Flexible Pipe Focus 2004.75 (07/2004-)
Removal and Installation

Materials
Name
Specification
Grease
SA-M1C9107-A

Removal

  1. NOTE:
    NOTE:Note the position of the spring washers to aid installation.

  1. Raise and support the vehicle.
    Refer to: Lifting (100-02 Jacking and Lifting, Description and Operation).

  1. CAUTION:
    CAUTION:Make sure that the exhaust flexible pipe is not forcible bent.

  1. NOTE:
    NOTE:Make sure that the exhaust flexible pipe is not twisted.

Installation
  1. CAUTION:
    CAUTION:Jointing compound must not be used forward of the catalytic converter.
    1. Torque: 48 Nm
    1. Torque: 47 Nm

  1. NOTE:
    NOTE:Make sure that the exhaust flexible pipe is not twisted.
    • Coat the catalytic converter to exhaust flexible pipe studs with grease.
      Material: Grease
      Torque: 48 Nm

  1. CAUTION:
    CAUTION:Make sure that the exhaust flexible pipe is not forcible bent.
  1. Lower the vehicle.

  1. Torque: 20 Nm

  1. Torque: 10 Nm

  1. Torque: 10 Nm

310 Fuel System > < Catalytic Converter