ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

ABOUT US
Fuel System Pressure Release - 1.4L Duratec-16V (Sigma)-1.6L Duratec-16V Ti-VCT (Sigma)-1.8L Duratec-HE (MI4)-2.0L Duratec-HE (M > < Fuel System Pressure Check - 1.8L Duratec-HE (MI4)-2.0L Duratec-HE (MI4)

Focus 2004.75 (07.2004-)

Fuel System - General Information - Fuel System Pressure Check—2.5L Duratec-RS (VI5)/2.5L Duratec-ST (VI5) Focus 2004.75 (07/2004-)
General Procedures

Special Tool(s)
310-025
Fuel Pressure Gauge

310-025-18
Test Hose for 310-025

310-025-19A
Test Hose for 310-025

310-042
Connector for 310-025
WARNING:
WARNING:Refer to: Petrol and Petrol-Ethanol Fuel Systems Health and Safety Precautions (100-00 General Information, Description and Operation).
  1. Release the fuel system pressure.
    Refer to: Fuel System Pressure Release (310-00, General Procedures).

  1. Assemble the special tools.
    Special Tool(s): 310-025, 310-025-18, 310-025-19A, 310-042

  1. Connect the special tools to the Schraeder valve.
    Special Tool(s): 310-025, 310-025-18, 310-025-19A, 310-042
  1. Start the engine and allow it to idle.
  1. Record the fuel system pressure at idle (3.3 ± 0.1 bar maximum).
  1. Stop the engine.
  1. Release the fuel system pressure.
    Refer to: Fuel System Pressure Release (310-00, General Procedures).

  1. Disconnect the special tools from the Schraeder valve.
    Special Tool(s): 310-025, 310-025-18, 310-025-19A, 310-042

  1. Disassemble the special tools.
    Special Tool(s): 310-025, 310-025-18, 310-025-19A, 310-042

Fuel System Pressure Release - 1.4L Duratec-16V (Sigma)-1.6L Duratec-16V Ti-VCT (Sigma)-1.8L Duratec-HE (MI4)-2.0L Duratec-HE (M > < Fuel System Pressure Check - 1.8L Duratec-HE (MI4)-2.0L Duratec-HE (MI4)