ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

ABOUT US
Passenger Side Center Register Air Discharge Temperature Sensor > < Driver Side Center Register Air Discharge Temperature Sensor

Focus 2004.75 (07.2004-)

Control Components - Defrost Vent/Register Blend Door Actuator—LHD Focus 2004.75 (07/2004-)
Removal and Installation

1. Remove the components in the order indicated in the following illustration(s) and table(s).

 
Item
Part Number
Description
1
-
Footwell trim panel
2
-
Glove compartment screws
See Removal Detail
3
-
Hose, glove compartment cooling (if equipped)
See Removal Detail
4
-
Glove compartment
See Removal Detail
5
-
Electrical connector, audio unit input (if equipped)
6
-
Passenger air bag deactivation (PAD) switch electrical connector (if equipped)

 
Item
Part Number
Description
7
-
Opening damper, glove compartment cover (unhook)
8
-
Glove compartment cover

 
Item
Part Number
Description
9
-
Bolts, defrost nozzle / air vent distribution flap actuator
See Removal Detail
10
-
Connector, defrost nozzle / air vent distribution flap actuator
11
-
Actuator - defrost nozzle / air vent distribution flap

2. To install, reverse the removal procedure.

Removal Details

Item 2 : Glove compartment screws
  1. Fold down the covering caps of the screws for the glove compartment.

Item 3 : Hose, glove compartment cooling (if equipped)

NOTE:
NOTE:Only vehicles with glove compartment cooling
  1. Detach the central junction box (CJB) from the reinforcing element.

  1. Detach the glove compartment cooling hose from the glove compartment.

Item 4 : Glove compartment
  1. Remove the access flap for the navigation system DVD mechanism (if equipped).

Item 9 : Bolts, defrost nozzle / air vent distribution flap actuator
  1. Unclip the dashboard wiring harness and slide it to one side.

Passenger Side Center Register Air Discharge Temperature Sensor > < Driver Side Center Register Air Discharge Temperature Sensor