Removal and Installation 1. Remove the components in the order indicated in the following illustration(s) and table(s). 1 - Bolt, lower dashboard cover 5 - Remote control electrical connector, audio unit (if equipped) 6 - Bolts, steering column lower cover 7 - Steering column lower cover 9 - Bolts, front footwell air duct 10 - Front footwell air duct 11 - Electrical connector, air outlet temperature sensor, driver's side footwell 2. To install, reverse the removal procedure. Removal Details Item 3 : Data link connector (DLC) | -
Detach the DLC from the lower dashboard cover. | Item 4 : Remote control, audio unit (if equipped) | -
Detach the audio unit remote control from the steering column lower cover. - Using a thin bladed screwdriver, release the locking tang.
| Item 12 : Air outlet temperature sensor, driver's side footwell | -
Turn the air outlet temperature sensor clockwise through 90 degrees and remove it. | |