Ford Workshop Service and Repair Manuals
HOME
FEATURES
MENU
INDEX
ABOUT US
413-13A Parking Aid - Vehicles With: Rear Parking Aid >
< Warning Devices
Focus 2004.75 (07.2004-)
Mechanical Repairs
4 Electrical
413 Instrumentation and Warning Systems
413-09 Warning Devices / Diagnosis and Testing
General Procedures
Safety Belt Minder Deactivating-Activating
Warning Devices - Safety Belt Minder Deactivating/Activating
Focus 2004.75 (07/2004-)
General Procedures
Preparation
Apply the parking brake.
Place the transmission selector lever in P (Park) - vehicles with automatic transmission or the neutral position - vehicles with manual transmission.
Turn the ignition switch to the 0 position.
Close all the vehicle doors from the inside of the vehicle.
Unbuckle the drivers safety belt.
Deactivating/Activating
NOTE:
Deactivation of the belt minder may also be carried out using WDS. Follow the instructions on the screen.
Turn the ignition switch to position II. (Do not start the engine).
The safety belt warning indicator will extinguish within 10 seconds.
NOTE:
Step 3 must be completed within 60 seconds or the procedure must be repeated.
Buckle then unbuckle the safety belt nine times, ending with the safety belt unbuckled.
The safety belt warning indicator flashes three times to confirm the belt minder status change.
To activate the belt minder, repeat Steps 1 through 3.
After confirmation, the deactivation/activation procedure is complete.
Mechanical Repairs
4 Electrical
413 Instrumentation and Warning Systems
413-09 Warning Devices / Diagnosis and Testing
General Procedures
Safety Belt Minder Deactivating-Activating
413-13A Parking Aid - Vehicles With: Rear Parking Aid >
< Warning Devices